Washing machine does not spin: 8 possible causes

The laundry is fresh from the machine and should be swiftly hung on the line - yet instead of being halfway dried, the garments are moist or even wet. An obvious indication that something went wrong when the washing machine was spinning. 

Numerous alternative explanations exist for this: Various error causes exist, ranging from a loose plug to a damaged motor. Often, the only solution is to contact an expert who will inspect and fix the gadget. If you have an issue with your washing machine's spinning, you may be able to fix it yourself without the assistance of a service specialist.

Washing machine does not spin properly

There are several indications that the washing machine is not spinning at all or not spinning properly:

  • The washing machine sounds different than usual.
  • The laundry is still damp or even wet when it comes out of the machine.
  • There is still water in the drum at the end of the wash cycle.

Depending on which indications are observed, different causes come into question.

8 Possible Causes And Solution

The search for the cause of the missing spin can be tedious. Start with the most straightforward option and progressively work your way up to the more sophisticated options.

Always turn off the electricity and water supply before dismantling individual parts for safety reasons. Modern washing machines have sophisticated algorithms that can identify potential errors. An error code will then show on the screen to assist you in locating the issue.

When dealing with major electrical appliances, you should contact a service expert if you are unclear on how to manage them. This protects the item against damage or injury caused by incorrect handling.

  • Power supply

The most common cause of a washing machine that won't spin is a power outage or a broken connection. Check the socket's tightness to see whether it's a cause of the error before taking additional action. A test spin can be done to check if the problem persists if the connection is stuck.

  • Wrong loading

Modern washing machines incorporate an imbalance sensor. For safety concerns, this sensor pauses the spin cycle if, for example, an inappropriate load or an angled posture causes the machine to leap or even tip over.

A suitable amount of laundry, which can be distributed well in the washing drum, and tiny feet, which can compensate for any unevenness in the surface, can help. There is typically no water in the drum when an imbalance occurs since the pumps are operating correctly.

  • Transport lock

If your washing machine won't spin after a move or if it's a newer model, check the transport lock. The transport lock on the rear of the washing machine prevents the drum from rolling back and forth during travel. The fuse must be removed before use to ensure proper operation of the washing machine. During the wash or spin cycle, loud noises may indicate that the transport lock has been installed.

  • Constipation

Washing machine does not spin

If these external variables are eliminated, the washing machine's inside may be gently addressed. The easiest way to rectify blockages is in the lint filter, drain hose, or siphon. Other items that get into the washing machine with the clothes, such as dirt, stones, hair, buttons, etc., might also gather here and inhibit appropriate spinning.

The issue in this scenario is that the water cannot be effectively pushed away. In a blocked washing machine, water frequently lingers after washing. The obstructions may be eliminated quickly and without the assistance of a professional. Regular washing machine cleaning can avoid these issues.

  • Foreign body

If your washing machine no longer spins, try shifting the drum manually. A sock, for example, may get wedged between the drum and the pump to prevent it from spinning. To remove the object, open the washing machine's rear. An expert can help here to avoid inappropriate handling.

  • Defective drain pump

If all drains are clear and there are no foreign objects in the machine, the problem may be a damaged sewage pump. This is suspected if there is water in the device or if the pump produces rattling noises. Experts should replace the pump to guarantee proper installation and removal and correct the issue.

  • Worn engine brushes

Wear on the engine brushes can cause a machine to stop spinning correctly. The first signs of wear and tear can appear here after about four years. The spinning requires a lot of energy, and the motor can't supply it. The engine must be dismantled to inspect and replace the engine brushes. Ideally, an expert should also do this work.

  • Defective imbalance

Technical issues can potentially cause a broken spin cycle. A bad imbalance sensor or a software bug might cause the spinning to stop for no reason. Customer support can swiftly assess if the gadgets are defective and fix them.

Leave a Comment